MagFlow 6410

Inline Mains Operated

Introduction

Electromagnetic flow measurement has been in use around the world for 50 years and more, as witnessed by the popularity of these meters that continues unabated in virtually all sectors of industry. Electromagnetic Flowmeters can be used to measure all electrically conductive liquids (> 20 µS/cm) with or without solids, e.g. water, wastewater, sludge, slurries, pastes, acids, alkalis, juices, fruit pulp, etc.

Adept MagFlow 6410 Full Bore Electromagnetic Flowmeter is suitable for the most demanding applications. It is based on Faraday’s law of Electromagnetic Induction. The meter features flanged construction and is available with choice of liner and electrode material. All meters consist of a sensor and a converter that may be mounted either integral to the sensor or remotely with a field mount kit. Adept Flowmeters are calibrated at our own Water Flow Calibration Facility. It uses the primary method of measuring the water flow by gravimetric principle. The facility is designed for calibration of flowmeters under controlled and stable flow conditions.

Salient Features

Based on Faraday’s law of electromagnetic induction

Coil assembly in hermetically sealed welded construction

High linearity due to characteristic magnetic field

High long-term stability and reliability

Flow tube sizes 10 mm to 3000 mm and above

Integral or remote transmitter

Field interchangeable electronics

Absolute zero stability and noise elimination due pulsed DC excitation

Applications

Chemical, petrochemical and process industries

Food and drug industries

Paper and pulp industries

Dredging industries

Fertilizers industries

Pharmaceutical industries

Sugar, beverage industries

Water and waste water management

Mining industries

Salient Features

  Based on Faraday’s law of electromagnetic induction

  Coil assembly in hermetically sealed welded construction

  High linearity due to characteristic magnetic field

  High long-term stability and reliability

  Flow tube sizes 10 mm to 3000 mm and above

  Integral or remote transmitter

  Field interchangeable electronics

  Absolute zero stability and noise elimination due pulsed DC excitation

Applications

  Chemical, petrochemical and process industries

  Food and drug industries

  Paper and pulp industries

  Dredging industries

  Fertilizers industries

  Pharmaceutical industries

  Sugar, beverage industries

  Water and waste water management

  Mining industries

Product Selection Guide

ParametersSpecifications
Nominal dia (mm) 10 to 3000
Working pressure (kg/cm2) 10, 16, 25, 40
Working temperature Integral PTFE – 120°C
Remote PTFE – 180°C
Others – 70°C
Electrode material SS 316L Std.*
Sensor lining Std. Rubber*
Display version Integral/Remote
Measuring tube material SS 304 Std.*
Sensor housing material Std. CS*
End connection Flange/Wafer/Tri-clamp/SMS
Flange standard ANSI 150*
Measuring range 0.2 to 12 m/sec. Bidirectional
Accuracy % of measured value ±O.5% (±O.2% consult factory)
Repeatability ±0.2% of Span
Display2 line LCD
Display units All standard engineering units in m3, litre, gallon, ft3, imperial gallon
Output Std. 4 – 20 mA*
Power supply 12 – 60 V DC or
80 – 300 V AC/DC
Solar powered
Protection class for sensor Std. IP 65
Option IP 67/IP 68 for flow tube in remote type
Protection class for transmitter IP 67
Cable length for remote Std. 10 m*
Installation Inline flanged type

Subscribe to Newsletter